D-LINK DAP-1360 WIRELESS N300 OPEN SOURCE ACCESS POINT

Wireless N300 Open Source Range Extender

Seven Operation Modes
Can be flexibly configured to operate as an Access Point, Wireless Client, Bridge, Bridge with AP, Repeater, WISP Client Router or WISP Repeater.

Total Security
Complete set of security features including WEP/ WPA/WPA2/WPS to safeguard your network against outside intruders.

Better Wireless Coverage
Wireless N draft standard offers an increased range that is six times further than 802.11g

Connect Home and SOHO To a Wireless Network
Connect this Access Point to a broadband modem and wirelessly share your Internet connection. The D-Link DAP-1360 access point is a draft 802.11n compliant device that delivers up to 14x faster speeds1 and 6x farther range1 than 802.11g while staying backward compatible with 802.11g and 802.11b devices. Enjoy surfing the web, checking e-mail, and chatting with family and friends online.

Protect Your Wireless Network and Data Easily
The DAP-1360 provides 64/128-bit WEP encryption and WPA/WPA2 security to protect your network and wireless data. This device also supports WiFi Protected Setup (WPS) to quickly and securely setup a wireless network. In addition, it also provides MAC address filtering a nd the disable SSID Broadcast function to limit outsiders’ access to your home and office network.

Flexibly Configure Your AP for Different Applications
The DAP-1360 can be configured to operate as (1) an Access Point to act as a central hub for wireless users, (2) a Wireless Client to connect to another Access Point, (3) a Bridge to joint two wireless workgroups together, (4) a Bridge with AP to act as wireless hub and a bridge at the same time, (5) a Repeater to extend the wireless coverage to cover all “dead” spots, (6) a WISP Client Router to let wireless Internet service subscribers share Internet connection with home/office Ethernet-enabled computers without the need for an extra router, or (7) a WISP Repeater to let WISP subscribers share Internet connection with wireless computers without any extra router.

Easy to Install and Use
With D-Link Setup Wizard, you can set up your wireless network in minutes. It configures your DAP-1360’s operation mode and makes it easy to add new wireless devices onto the network, and helps you create a simple wireless network for your home and office.

Technical Specifications :
- Network Standards
802.11n wireless LAN
802.11g wireless LAN
802.11b wireless LAN
802.3/802.3u 10BASE-T/100BASE-TX Ethernet
ANSI/IEEE 802.3 NWay autonegotiation
- Device Interfaces
802.11g/n wireless LAN
One 10/100BASE-TX Ethernet LAN port
- Operating Frequency
2.4 to 2.4835 GHz
- Operating Channels
FCC: 11
ETSI: 13
- Radio & Modulation Schemes
DQPSK, DBPSK, CCK, OFDM
- Operation Modes
Access Point
Wireless Client
Bridge
Bridge with AP
Repeater
WISP Client Router
WISP Repeater
- Antenna
Two 2dBi Gain omnidirectional antennas
- Security
64/128-bit WEP data encryption
WPA-PSK, WPA2-PSK
WPA-EAP, WPA2-EAP
TKIP, AES
MAC address filtering
SSID broadcast disable function
WPS (WiFi Protected Setup)
- Advanced Features
Quality of Service (QOS): Wi-Fi Multimedia (WMM)
IGMP Snooping
- Device Management
Web-based management through Internet Explorer v.6 or later, Netscape Navigator v.6 or later or other Java enabled browser
- Diagnostic LED
Power
Wireless
Security
LAN
- Power Input
5VDC 2.5A
External power adapter
- Dimensions
144 (W) x 109 (D) x 30 (H) mm (5.67 x 4.29 x 1.18 inches)
- Weight
229 grams (0.5 lb)
- Operating Temperature
0° to 55° C (32° to 131° F)
- Storage Temperature
-10° to 70° C (14° to 158° F)
- Operating Humidity
10% to 90% non-condensing
- Storage Humidity
5% to 95% non-condensing
- Certification
FCC Class B
CE
Wi-Fi b/g/n