563101 T.0X DVB-S2 to COFDM

Product description:

The DVB-S2 transmodulator to COFDM receives a satellite transponder in some DVBS (QPSK) or DVBS2 (QPSK or 8PSK) modulation formats and demodulates it by obtaining an MPEG-2 transport package. The TS is then modulated in COFDM format and converted to the output channel (UHF or VHF).


Technical features:

TS settings in order to comply with DVB-T requirements:
1. Stuffing, to perform faster scanning in the STB or when using STB with a fixed symbol rate.
2. MUX services removing to avoid STB detection/loading

Configurable TS identifier in the NIT. It is possible to substitute the satellite descriptor for the DTT descriptor allowing a better STB service detection.
Occupation per service and of the complete MUX COFDM, allowing output space optimization.
LCN (Logical Channel Number) setting to facilitate the sorting of the services in the STB.

Satellite Demodulator
- Input frequency 950-2150 MHz
- Symbol rate 10-30 Mbaud (QPSK-8PSK)
- Frequency steps 1 MHz
- Input connectors and output F female
- Input impendance 75 ohm
- LNB power supply 13/17V/OFF 22 Khz (ON/OFF)
- Through loss <1,5 dB typ.
- Modulation DVB-S2 (QPSK, 8PSK) DVB-S (QPSK)
- Internal FEC LDPC (9/10, 8/9, 5/6, 4/5, 3/4, 2/3,3/5, 1/2, 1/4, 1/3, 2/5
- External FEC BCH (Bose-chaudhuri-hocquenghem)
- Roll-off factor 20%, 25%, 35%
- Input VSWR 10 dB min.

COFDM Modulator
- Modulation format QPSK, 16QAM, 64QAM
- Guard Interval 1/4, 1/8, 1/16, 1/32
- FEC 1/2, 2/3, 3/4, 5/6, 7,8
- Bandwidth 7 MHz, 8 MHz
- Scrambling DVB ET300744
- Interleaving DVB ET300744
- Cell_id Selectable
- Output spectrum Normal /Inverted (Select)

RF Output
- Output frequency 45-862 MHz/474-858 MHz (UHF)
- Frequency steps 166 KHz
- Maximum output level 80±5 dB΅V (prog.)
- Attenuation >15 dB (prog.)
- Through loss <1,5 dB typ.
- Return loss >12 dB typ.
- Input/output connector F female
- Output impedance 75 ohm

General
- Power supply 24 V
- Comsumption 24V/300 mA
- Protection index IP20