563852 T.0X ENCODER TWIN IP/HDMI-COFDM/QAM/IP

Product description:

563852 HDTV T.0X Encoder TWIN HDMI/YPbPr/IP MPEG2/4 to QAM/COFDM/IP is an encoder/modulator which generates an IP/COFDM-QAM TV channel with two services; each service can come from three different input formats (HDMI, YPbPr or IP). like cameras, PCs, or TVSAT receivers. It is able to encode either in MPEG-2 or H.264(HDTV) format. It can be configured with the PCT5.0 handset or using the Web Server incorporated in each module. This server enables a remote or local management and configuration. The highest gain of the output signal (up to 115dB΅V or 103dB΅V with the loop-through active) avoid the need of using additional amplifiers. You can choose between generating IP, DVB-T (DTT) channels or DVB-C (QAM) to use in Cable TV operator networks. User friendly configuration using an embedded web server. Remote control through the Internet. High output gain with no need of extra amplification. Configurable COFDM or QAM output. Energy efficient due to its low power consumption.

WORKING MODES:
1) 1 or 2x HDMI inputs to IP & COFDM DVB-T /QAM DVB-C output, output IP could be SPTS or MPTS
2) IP input and COFDM DVB-T /QAM DVB-C output (not using the HDMI connector at all)


Technical features:

INPUTS

- VIDEO Connectors: 2 sets - 3x RCA for Video (Y, Pb, Pr), 2 sets - 1x RCA for CVBS Video
- AUDIO Connectors: 2 sets - 2x RCA for Analog Audio (L, R), 2 sets - 1x RCA for Digital Audio, 2 sets - 1x Toslink for Digital Audio (Optical).
- VIDEO + AUDIO Connectors 2 sets - 1x HDMI
- QAM Connectors ''F'' Female (loop-through combiner input)
- IP MULTICAST Connectors 2x RJ45 (UDP or RTP)

ENCODING PROFILE

VIDEO
- Output Format MPEG-2 / H.264
- Resolution 480i, 480p, 576i, 576p, 720p, 1080i & 1080p (only supported with MPEG-4 video codec), Supports auto-scan for input resolution
- Aspect Ratio 4:3, 16:9, and pass through
- GOP 10, 12, 15, 16, 18, 20, 24 or 30s
- Transport rate Variable
- Video bit rate Variable

AUDIO
- Output format Dolby Digital AC-3 (only digital passthrough) or MPEG1 Layer2 (analog input or HDMI uncompressed PCM audio).
- Sampling rate kHz 48
- Output bitrate Variable

OUTPUT

RF
- Connectors 1x ''F'' Female
- Frequency Range MHz 46 ... 862
- Max output level dB΅V +115 (+103 with loop-through)
- MER dB >40 (typ)
- Spurious dBc -60
- Impedance O 75
- I/Q Phase Error Ί <1
- I/Q Amplitude Imbalance % <1

QAM
- Modulation format 16, 32, 64, 128, 256
- BaudRate Mbaud 6,9
- Roll-off % 15
- Code Reed Solomon
- Spectrum Mode Normal / Inverted
- Frequency Step KHz 250

COFDM
- Modulation format QPSK, 16QAM, 64QAM
- Guard Interval 1/4, 1/8, 1/16, 1/32
- FEC 1/2, 2/3, 3/4, 5/6, 7/8
- Bandwidth MHz 6, 7, 8
- Cell_id Editable
- Frequency Step KHz 125 / 166

SPTS IP MULTICAST
- Connectors 2x RJ45 (UDP or RTP) or MPTS

PSI PARAMETERS
- Transport Stream ID Editable
- Original Network ID Editable
- Network ID Editable
- Logical Channel Number Editable
- NIT Version Manual / Automatic
- SDT Version Manual / Automatic
- Type LCN Generic / UK / NorDig V1 / NorDig V2
- Network Name Editable
- Service PID Editable
- Service Name Editable
- Service ID Editable

MONITORING / CONTROL
- Local control Full configuration with LCD handheld programmer
- Local monitoring: LOOP status LED, OUTPUT status LED, TEMP status LED, CH1/CH2 status LEDs, Ethernet status LEDs.
- Remote monitoring: Centralized web based remote control, management, alarms, and software upgrades
- Control Daisy-chain integrated ethernet switch

GENERAL
- Power supply Vdc 24
- Power disipation W <20.4
- Operating Temperature ΊF / ΊC 32 to 113 / 0 to 45